Mattress Care and Maintenance
It can take up to 30 days for your body to adjust to the feel and support of your new mattress and base.
Body impressions are on the surface of the mattress are a normal consequence of the upholstery filling settling to a final position, combined with the mattress conforming to your body’s individual contouring and weight and does not constitute a manufacturing fault
Do not lift your mattress by yourself as you may cause injury.
Always carry your mattress on its side.
Handles (where fitted) are for positioning only, not for lifting or carrying.
Don’t fold your mattress under any circumstances. It will damage the edge support wire. Gently flex the mattress when moving through doorways.
Don’t remove the law tag located at the end of your mattress. This contains care and content details vital to your guarantee.
Dispose of the plastic bag immediately. Do not let children use the bag as play things.
It is recommended that your mattress be fitted with an absorbent mattress protector to avoid accidental spoiling. A waterproof cover could also be fitted under the mattress protector to protect the mattress from water or other fluids. PLEASE NOTE: Your 60 night guarantee is not valid unless you use a waterproof mattress protector.
Base Support A structurally sound foundation is essential to the performance of your mattress. Timber slats should be no more than 7cm apart to provide the correct support of a mattress and have a centre support rail with a centre support leg. Flexible (convex arching/posture) slats can lose their resiliency over time becoming concave and should be rotated from high load areas (centre) to low load areas (foot/head) and replaced regularly. Solid panels must have air holes to allow adequate air circulation and moisture transfer.
Body Signature All mattresses will exhibit body signatures as the mattress upholstery conforms to your body’s individual contouring and weight. This is not a defect and does not constitute a manufacturing fault. Body signatures up to 40mm on a pillow top mattress and 25mm on a non-pillow top mattress is considered normal occurrence.
Rotating your mattress from time to time will help to equalise body impressions. Turn your mattress from end to end (or up side down if it is double sided) every month for the first 6 months of use. Then turn at least once every 6 months thereafter.
Leg Assembly Instructions. A 2 person assembly is recommended:
1. Turn the base over and insert leg into hole and turn clockwise. Repeat for all legs.
2. Tighten by hand until all legs are firmly in place
3. Turn base back over (it is recommended that 2 people complete this action) and re-tighten legs as tightly as possible by hand. Check and re-tighten every 4 months.
4. Important: It is the purchaser’s responsibility to tighten the legs to ensure the bed is set up as intended.